Innokin Zenith II Tank Atomizer 5.5ml
- Τιμή:
-
19,74 €
23,28 € - Ναυτιλία:
-
standard - 22,01 €
17-25 days (based on actual tracking data)
Ο πραγματικός χρόνος παράδοσης εξαρτάται από τον μεταφορέα και άλλους παράγοντες.
Δείτε τις λεπτομέρειες στο Αποστολή & πληρωμήΠαράδοση σε όλη την Κύπρο
Innokin Zenith II Tank Atomizer:
The Innokin Zenith II Featuring a tighter and smoother MTL vape than previous versions, and coming with outstanding restricted direct lung (RDL) vape. The Zenith II includes two of the newest Z-coils, the 0.8 Ohm flavor maker and the 0.3 Ohm RDL. The Zenith II continues the super simple twist-to-fill top cap and the easy coil replacement system.
Parameters:
- Brand: Innokin
- Unit: 1 Set
- Superior 304 Stainless Steel Tank Construction
- 51.7*26mm
- Pyrex Glass Reinforcement
- Threaded Glass Locking Ring
- 5.5ml Tank Capacity
- Resistance range: 0.1ohm-3.5ohm
- Thread type: 510 thread
- Twist Top Fill System - Reveals Fill Port
- Spring Loaded Leak Prevention System - Clean Coil Changes
- Innokin Z-Coil Series
- Package: Gift Box
Features:
- Easy twist top fill, 5.5ml e-liquid capacity.
- Changeable 510 drip tip and glass tube.
- Precise airflow control for both MTL and RDL.
- Compatiable with all Z Coils (The tank comes with 0.8 ohm and 0.3 ohm Z coil).
Each set contain:
- 1pc Zenith II Tank (0.8ohm MTL Coil installed)
- 1pc Spare Z 0.3ohm RDL Coil
- 1pc Spare Black Glass Tube (5.5ml)
- 1pc Spare Zenith II Tank RDL Black Drip Tip
- 1pc Spare O-Rings Set
- 1pc Quick Start Guide
Short review about Innokin Zenith II Tank Atomizer
The manufacturer suggests using evaporators of the Prism S line by Innokin - 0.8 or 1.5 ohms. The characteristics of the coils, as well as a miniature air intake, suggest that we are dealing with a simulated cigarette puff. At the moment, Prism T20S is sold separately, so if you are interested in buying a "cigarette box", you can pay attention to it.
This product allows you to replace the coil of your Prism T20 S clearomizer or your Endura T20 S electronic cigarette by Innokin at the value of your choice (0.8 ohms or 1.5 ohms). Prism S coils are designed to allow organic cotton to be perfectly soaked.
They are available in 2 values:
0.8 ohm: operating range between 16 and 18 watts
1.5 ohms: range of use between 13 and 14 watts
How to prime a Prism S Coil by Innokin?
To make the most of the flavours of your e-liquid, we advise you to pre-soak your coil before the first use. To do this, you just need to pour a few drops inside (from the top of the coil) as well as on the sides (small holes on the cylindrical part). The cotton of your coil will, by capillarity effect, "suck up" the e-liquid.
In order to perfect the priming, fill the tank and wait about ten minutes. Once the different steps have been completed, it's time to vape your favourite e-liquid! Buy online with delivery Innokin Prism S Coil 5pcs and enjoy your vaping.
When to change the Innokin Prism S Coil?
A resistor is a consumable part of your electronic cigarette. Generally, an electronic cigarette coil should be replaced every one to three weeks. Several factors will influence how often you need to change it:
Choose a suitable e-liquid: if you use a liquid with a high VG rate, the cotton and the coil of your coil will tend to clog up much faster than an e-liquid with a more balanced PG / VG mixture.
Adapt the power: a coil generally has an optimal range of use to respect (ex: between 15 and 30 watts). An unsuitable power (eg 40 watts) will tend to wear out the coil prematurely and burn the cotton (dry hit effect).
Frequency of use: the frequency of use is a determining factor in the lifespan of your coil. A vaper using his electronic cigarette all day and every day will have to change coil more regularly.
Conversely, an occasional vaper who only partially uses their e-cig can expect the coil to last a few days or weeks longer.
All new resistors must be first soaked with liquid for about 10 minutes so that the cotton inside the coil has time to impregnate the liquid and then fill your tank with e-liquid. coil to an average lifespan of two weeks. When a coil begins to deteriorate, it is because it provides less smoke and an unpleasant taste will appear in the mouth.
That is, the sweeter an e-liquid is and the higher its glycerin content, the more it will tend to foul coil faster than other e-liquids.
The change of coil is a simple but thorough operation. To remove your worn coil you must unscrew the top cap as well as the bot cap. You must then push the coil up and down to get it out through the lower part of the clearomizer. Unscrew the tank base and pull on the resistor.
The resistor is not screwed but clipped onto the clearomizer. When reassembled, the resistor must be well placed in its housing before replacing the tank base. Remember to change your resistors every 10 to 15 fillings. Beware the clearomizer must be empty when changing resistors.
When you put a new coil in the Prism T20S you have to be very careful to align the coil to the clearomizer so as not to leave any slits (risk of leakage).
Μάρκες |
Innokin
|
Attr1 (από επιλογή) |
Stainless steel
Black Gun Metal |
Attr2 (από επιλογή) |
Zenith II Tank
CRC Version |
Μέθοδος αποστολής | ΠΕΡΙΓΡΑΦΗ | Κόστος αποστολής | Χρόνος παράδοσης |
---|---|---|---|
Μέθοδος αποστολής standard | ΠΕΡΙΓΡΑΦΗ | Κόστος αποστολής22,01 € | Χρόνος παράδοσης17-25 days (based on actual tracking data) |